Waterloo, Wi School District Jobs, Articles H

Secure .gov websites use HTTPS (This listing does not apply to wastes generated from the manufacture of 3-iodo-2-propynyl n-butylcarbamate. The procedures described in paragraphs (d)(1)(d)(3) and (d)(5) of this section establish when nonwastewaters from the production of dyes/pigments would not be hazardous (these procedures apply to wastes that are not disposed in landfill units or treated in combustion units as specified in paragraph (a) of this section). Depending on the type of solvent you are exposed to, the body will react in different ways. (B) The analytical measurements must be sufficiently sensitive, accurate and precise to support any claim that the constituent mass loadings are below the listing levels of paragraph (c) of this section. Therefore, as part of your job, it's important for you to understand the hazards of working with or around solvents. (ii) If 1,2-phenylenediamine is present in the wastes, the generator can use either knowledge or sampling and analysis procedures to determine the level of this constituent in the wastes. Organic Solvents | NIOSH | CDC - Centers for Disease Control and Prevention ), Bag house dusts and filter/separation solids from the production of carbamates and carbamoyl oximes. (C) The calculations performed to determine annual total mass loadings for each K181 constituent in the nonwastewaters during the year. will bring you to those results. If you would like to comment on the current content, please use the 'Content Feedback' button below for instructions on contacting the issuing agency. as part of that chemical's infrastructure. (C) The quantity of dyes and/or pigment nonwastewaters generated. Used oil containing more than 1000 ppm total halogens is presumed to be a hazardous waste because it has been mixed with halogenated hazardous waste listed in subpart D of part 261 of this chapter. (i) Prepare and sign a written equipment cleaning plan that describes: (D) How solvent rinses will be tested; and. The ZDHC Manufacturing Restricted Substances List (ZDHC MRSL) is a list of chemical substances banned from intentional use in the processing of textile materials, leather, rubber, foam, adhesives and trims used in textiles, apparel, and footwear industry. 3 - Includes mineral fiber emissions from facilities manufacturing or processing glass, rock, or slag fibers (or other mineral derived fibers) of average diameter 1 micrometer or less. Solvents are very useful in our everyday lives. (B) The annual testing requirements are reinstated if the manufacturing or waste treatment processes generating the wastes are significantly altered, resulting in an increase of the potential for the wastes to exceed the listing levels. These lists are organized into three categories: The F-list (non-specific source wastes). If the total annual quantity of dyes and/or pigment nonwastewaters generated is greater than 1,000 metric tons, the generator must perform all of the steps described in paragraphs ((d)(3)(i)(d)(3)(xi) of this section) in order to make a determination that its waste is not K181. (1) For the purposes of the F037 and F038 listings, oil/water/solids is defined as oil and/or water and/or solids. Choosing an item from Manganese, bis(dimethylcarbamodithioato-S,S)-. In order to demonstrate that it is meeting the landfill disposal or combustion conditions contained in the K181 listing description, the generator must maintain documentation as described in paragraph (d)(4) of this section. (This listing does not include wastewaters, wastewater treatment sludges, spent catalysts, and wastes listed in, Condensed light ends, spent filters and filter aids, and spent desiccant wastes from the production of certain chlorinated aliphatic hydrocarbons, by free radical catalyzed processes. Therefore, as part of your job, it's important for you to understand the hazards of working with or around solvents. The F list includes approximately 30 solvents. (c) K181 Listing Levels. or existing codification. Volatile Organic Compound Exemptions | US EPA Hazards Of Solvents | OSHA Safety Manuals [Comment: The phrase commercial chemical product or manufacturing chemical intermediate having the generic name listed in . What are VOC Exemptions? Breathing in the solvent vapors can quickly result in the chemical getting into your body and bloodstream via your lungs. F020, F021, F022, F023, F026 and F027. [Comment: For the convenience of the regulated community the primary hazardous properties of these materials have been indicated by the letters T (Toxicity), and R (Reactivity). (T) . that the terms of the exclusion were met, Wastewater treatment sludges from the production of vinyl chloride monomer using mercuric chloride catalyst in an acetylene-based process, Nonwastewaters from the production of dyes and/or pigments (including nonwastewaters commingled at the point of generation with nonwastewaters from other processes) that, at the point of generation, contain mass loadings of any of the constituents identified in, Brine purification muds from the mercury cell process in chlorine production, where separately prepurified brine is not used, Chlorinated hydrocarbon waste from the purification step of the diaphragm cell process using graphite anodes in chlorine production, Wastewater treatment sludge from the mercury cell process in chlorine production, Baghouse filters from the production of antimony oxide, including filters from the production of intermediates (e.g., antimony metal or crude antimony oxide), Slag from the production of antimony oxide that is speculatively accumulated or disposed, including slag from the production of intermediates (e.g., antimony metal or crude antimony oxide), Residues from manufacturing and manufacturing-site storage of ferric chloride from acids formed during the production of titanium dioxide using the chloride-ilmenite process, By-product salts generated in the production of MSMA and cacodylic acid, Wastewater treatment sludge from the production of chlordane, Wastewater and scrub water from the chlorination of cyclopentadiene in the production of chlordane, Filter solids from the filtration of hexachlorocyclopentadiene in the production of chlordane, Wastewater treatment sludges generated in the production of creosote, Still bottoms from toluene reclamation distillation in the production of disulfoton, Wastewater treatment sludges from the production of disulfoton, Wastewater from the washing and stripping of phorate production, Filter cake from the filtration of diethylphosphorodithioic acid in the production of phorate, Wastewater treatment sludge from the production of phorate, Wastewater treatment sludge from the production of toxaphene, Heavy ends or distillation residues from the distillation of tetrachlorobenzene in the production of 2,4,5-T, 2,6-Dichlorophenol waste from the production of 2,4-D, Vacuum stripper discharge from the chlordane chlorinator in the production of chlordane, Untreated process wastewater from the production of toxaphene, Untreated wastewater from the production of 2,4-D, Process wastewater (including supernates, filtrates, and washwaters) from the production of ethylenebisdithiocarbamic acid and its salt, Reactor vent scrubber water from the production of ethylenebisdithiocarbamic acid and its salts, Filtration, evaporation, and centrifugation solids from the production of ethylenebisdithiocarbamic acid and its salts, Baghouse dust and floor sweepings in milling and packaging operations from the production or formulation of ethylenebisdithiocarbamic acid and its salts, Wastewater from the reactor and spent sulfuric acid from the acid dryer from the production of methyl bromide, Spent absorbent and wastewater separator solids from the production of methyl bromide, Wastewater treatment sludges from the manufacturing and processing of explosives, Spent carbon from the treatment of wastewater containing explosives, Wastewater treatment sludges from the manufacturing, formulation and loading of lead-based initiating compounds, Dissolved air flotation (DAF) float from the petroleum refining industry, Slop oil emulsion solids from the petroleum refining industry, Heat exchanger bundle cleaning sludge from the petroleum refining industry, API separator sludge from the petroleum refining industry, Tank bottoms (leaded) from the petroleum refining industry, Crude oil storage tank sediment from petroleum refining operations, Clarified slurry oil tank sediment and/or in-line filter/separation solids from petroleum refining operations, Spent Hydrotreating catalyst from petroleum refining operations, including guard beds used to desulfurize feeds to other catalytic reactors (this listing does not include inert support media), Spent Hydrorefining catalyst from petroleum refining operations, including guard beds used to desulfurize feeds to other catalytic reactors (this listing does not include inert support media), Emission control dust/sludge from the primary production of steel in electric furnaces, Spent pickle liquor generated by steel finishing operations of facilities within the iron and steel industry (SIC Codes 331 and 332), Spent potliners from primary aluminum reduction, Emission control dust/sludge from secondary lead smelting. (i) Document that previous equipment cleaning and/or replacement was performed in accordance with this section and occurred after cessation of use of chlorophenolic preservatives. This original list included 189 pollutants. Solvents are useful because they can dissolve . ZDHC MRSL - Roadmap to Zero (i) For the purposes of the F037 and F038 listings, aggressive biological treatment units are defined as units which employ one of the following four treatment methods: activated sludge; trickling filter; rotating biological contactor for the continuous accelerated biological oxidation of wastewaters; or high-rate aeration. a lighter and more quickly evaporated compound creates a more hazardous solvent fume. ( i) For the purposes of the F037 and F038 listings, aggressive biological treatment units are defined as units which employ one of the following four treatment methods: activated sludge; trickling filter; rotating biological contactor for the continuous accelerated biological oxidation of wastewaters; or high-rate aeration. citations and headings Colleyville transitioning away from household hazardous waste disposal (This listing does not include K125 or K126. (eg: Absorption by direct contact with the skin. It is not an official legal edition of the CFR. Wastewater treatment sludges from the manufacturing of motor vehicles using a zinc phosphating process will not be subject to this listing at the point of generation if the wastes are not placed outside on the land prior to shipment to a landfill for disposal and are either: disposed in a Subtitle D municipal or industrial landfill unit that is equipped with a single clay liner and is permitted, licensed or otherwise authorized by the state; or disposed in a landfill unit subject to, or otherwise meeting, the landfill requirements in, Wastes (except wastewater and spent carbon from hydrogen chloride purification) from the production or manufacturing use (as a reactant, chemical intermediate, or component in a formulating process) of tri- or tetrachlorophenol, or of intermediates used to produce their pesticide derivatives. Solvents - Overview | Occupational Safety and Health Administration (1) Determination based on no K181 constituents. This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote and/or pentachlorophenol, Wastewaters (except those that have not come into contact with process contaminants), process residuals, preservative drippage, and spent formulations from wood preserving processes generated at plants that use inorganic preservatives containing arsenic or chromium. If you have questions or comments regarding a published document please Please do not provide confidential (This listing does not apply to wastes generated from the manufacture of 3-iodo-2-propynyl n-butylcarbamate. Project 112/SHAD. 45 FR 33119, May 19, 1980, unless otherwise noted. 1 CFR 1.1 Generators that have knowledge (e.g., knowledge of constituents in wastes based on prior sampling and analysis data and/or information about raw materials used, production processes used, and reaction and degradation products formed) that their wastes contain none of the K181 constituents (see paragraph (c) of this section) can use their knowledge to determine that their waste is not K181. eCFR :: 40 CFR 261.3 -- Definition of hazardous waste. This brochure covers solvents other than water. 5 - A type of atom which spontaneously undergoes radioactive decay. (C) If the annual testing requirements are suspended, the generator must keep records of the process knowledge information used to support a nonhazardous determination. Navigate by entering citations or phrases 2H-1-Benzopyran-2-one, 4-hydroxy-3-(3-oxo-1-phenylbutyl)-, & salts, when present at concentrations greater than 0.3%. This content is from the eCFR and is authoritative but unofficial. [55 FR 50482, Dec. 6, 1990, as amended at 56 FR 30195, July 1, 1991; 70 FR 34561, June 14, 2005]. Solvents are chemicals used to thin or dissolve paint, grease, epoxies, adhesives, and coatings. EPA proposes former Indiana smelting plant for Superfund list - IndyStar [45 FR 33119, May 19, 1980, as amended at 48 FR 14294, Apr. (iv) Keep the following records on site for the three most recent calendar years in which the hazardous waste determinations are made: (A) The quantity of dyes and/or pigment nonwastewaters generated. (d) Procedures for demonstrating that dyes and/or pigment nonwastewaters are not K181. Chemical Hazards and Toxic Substances - Overview | Occupational Safety 42 U.S.C. (a) The following solid wastes are listed hazardous wastes from specific sources unless they are excluded under 260.20 and 260.22 and listed in appendix IX. There are Federal Register documents that will modify this content. (iii) Develop a waste sampling and analysis plan (or modify an existing plan) to collect and analyze representative waste samples for the K181 constituents reasonably expected to be present in the wastes. Carbamic acid, [1,2-phenylenebis (iminocarbonothioyl)]bis-, dimethyl ester. (5) Waste holding and handling. (e) The commercial chemical products, manufacturing chemical intermediates or off-specification commercial chemical products or manufacturing chemical intermediates referred to in paragraphs (a) through (d) of this section, are identified as acute hazardous wastes (H). Laboratories or other areas generating more than 5 gallons of hazardous waste (spent solvents) per month should accumulate the waste in safety cans. ), Organic residuals, excluding spent carbon adsorbent, from the spent chlorine gas and hydrochloric acid recovery processes associated with the production of alpha- (or methyl-) chlorinated toluenes, ring-chlorinated toluenes, benzoyl chlorides, and compounds with mixtures of these functional groups, Wastewater treatment sludges, excluding neutralization and biological sludges, generated during the treatment of wastewaters from the production of alpha- (or methyl-) chlorinated toluenes, ring-chlorinated toluenes, benzoyl chlorides, and compounds with mixtures of these functional groups, Organic waste (including heavy ends, still bottoms, light ends, spent solvents, filtrates, and decantates) from the production of carbamates and carbamoyl oximes. Such wastes include, but are not limited to, all sludges and floats generated in: induced air flotation (IAF) units, tanks and impoundments, and all sludges generated in DAF units. Camp Lejeune water contamination. These records must include: the volume of waste generated and disposed of off site; documentation showing when the waste volumes were generated and sent off site; the name and address of the receiving facility; and documentation confirming receipt of the waste by the receiving facility. If you work for a Federal agency, use this drafting n = 1, 2, or 3 (E) How cleaning residues will be disposed. The Code of Federal Regulations (CFR) is the official legal print publication containing the codification of the general and permanent rules published in the Federal Register by the departments and agencies of the Federal Government. (viii) Keep a running total of the K181 constituent mass loadings over the course of the calendar year. Phenol, 3-(1-methylethyl)-, methyl carbamate. (See Modification). (D) The calculations performed to determine annual mass loadings. (c) Any residue remaining in a container or in an inner liner removed from a container that has held any commercial chemical product or manufacturing chemical intermediate having the generic name listed in paragraphs (e) or (f) of this section, unless the container is empty as defined in 261.7(b) or 266.507 of this chapter. Guidance. If the wastes are determined to be hazardous and the generator has not complied with the subtitle C requirements during the interim period, the generator could be subject to an enforcement action for improper management. As you know, there are solvents that we use daily that are hazardous. (a) The following solid wastes are listed hazardous wastes from non-specific sources unless they are excluded under 260.20 and 260.22 and listed in appendix IX. Phenol, 3-methyl-5-(1-methylethyl)-, methyl carbamate. Solvents in the Workplace How to Determine If They Are Hazardous Waste September 2016 Version 2 2 DISCLAIMER This guide is not a regulation, nor can it be considered a substitute for the actual regulations, related laws, and applicable court decisions. Carbon tetrachloride, a solvent declining in use This organic solvent is very good at dissolving fats and oils. As a result of this widespread usage, it is important to know some of the hazards that are associated with the group of chemicals, generally called solvents.. Exposure to hazardous materials. (i) For the purposes of the F037 listing, sludges are considered to be generated at the moment of deposition in the unit, where deposition is defined as at least a temporary cessation of lateral particle movement. guide. The eCFR is displayed with paragraphs split and indented to follow 18, 2010]. as the internationally recognised standard for hazardous material classification and . with (3aS-cis)-1,2,3,3a,8,8a-hexahydro-1,3a,8-trimethylpyrrolo[2,3-b]indol-5-yl methylcarbamate ester (1:1). Health hazards associated with solvent exposure include toxicity to the nervous system, reproductive damage, liver and kidney damage, respiratory impairment, cancer, and dermatitis. (xi) Nonhazardous waste determinations must be conducted annually to verify that the wastes remain nonhazardous. Wastes are first listed in alphabetical order by substance and then listed again in numerical order by Hazardous Waste Number.]. Absence of a letter indicates that the compound is only listed for toxicity. 7-Benzofuranol, 2,3-dihydro-2,2-dimethyl-, methylcarbamate. (This listing does not include formulations containing Hexachlorophene sythesized from prepurified 2,4,5-trichlorophenol as the sole component. Mustard gas or lewisite. Phosphoric acid, diethyl 4-nitrophenyl ester, Phosphorodithioic acid, O,O-dimethyl S-[2-(methylamino)-2-oxoethyl] ester, Phosphorofluoridic acid, bis(1-methylethyl) ester, Phosphorothioic acid, O,O-diethyl O-(4-nitrophenyl) ester, Phosphorothioic acid, O,O-diethyl O-pyrazinyl ester, Phosphorothioic acid, O,O,-dimethyl O-(4-nitrophenyl) ester. (a) Wastes from wood preserving processes at plants that do not resume or initiate use of chlorophenolic preservatives will not meet the listing definition of F032 once the generator has met all of the requirements of paragraphs (b) and (c) of this section. Listed Wastes | Wastes | US EPA Solvents, often known as VOCs (volatile organic compounds), are used to dissolve or dilute other substances and can be found in many construction products such as paints, paint strippers, thinners and glues. Carbamic acid, methyl-, 3-methylphenyl ester. Pressing enter in the search box This document is available in the following developer friendly formats: Information and documentation can be found in our information or personal data. (b) Any off-specification commercial chemical product or manufacturing chemical intermediate which, if it met specifications, would have the generic name listed in paragraph (e) or (f) of this section. Displaying title 40, up to date as of 8/18/2023. Wastes are first listed in alphabetical order by substance and then listed again in numerical order by Hazardous Waste Number.]. The official, published CFR, is updated annually and available below under Increase after surgery or cast. Pyrrolo[2,3-b]indol-5-ol, 1,2,3,3a,8,8a-hexahydro-1,3a,8-trimethyl-, Warfarin, & salts, when present at concentrations greater than 0.3%. here. full text search results Punctures can result in the direct introduction of toxic chemicals into your body. PDF Solvents: Chemical Hazards in the Home - Natural Resources Institute Exposure and over-exposure to a solvent can come from various methods. (ii) Generators and treatment, storage and disposal facilities have the burden of proving that their sludges are exempt from listing as F037 and F038 wastes under this definition. ), Organics from the treatment of thiocarbamate wastes, Purification solids (including filtration, evaporation, and centrifugation solids), bag house dust and floor sweepings from the production of dithiocarbamate acids and their salts. Program Schedule. Solvents lead EPA top 10 hazardous list - Cattermole Consulting Inc. If you have comments or suggestions on how to improve the www.ecfr.gov website or have questions about using www.ecfr.gov, please choose the 'Website Feedback' button below. For Federal Register citations affecting 261.33, see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.govinfo.gov. (T) F0321 Wastewaters, process residuals, preservative drippage, and spent formulations from wood Residential properties and sediment at . Most of OSHA's PELs for Shipyard Employment are contained in 1915.1000 - Toxic and Hazardous Substances, and are listed by chemical name. (f) The commercial chemical products, manufacturing chemical intermediates, or off-specification commercial chemical products referred to in paragraphs (a) through (d) of this section, are identified as toxic wastes (T) unless otherwise designated. View the most recent official publication: These links go to the official, published CFR, which is updated annually. Nicotine, & salts (this listing does not include patches, gums and lozenges that are FDA-approved over-the-counter nicotine replacement therapies). Please click here to see any active alerts. If the total annual quantity of dyes and/or pigment nonwastewaters generated is 1,000 metric tons or less, the generator can use knowledge of the wastes (e.g., knowledge of constituents in wastes based on prior analytical data and/or information about raw materials used, production processes used, and reaction and degradation products formed) to conclude that annual mass loadings for the K181 constituents are below the listing levels of paragraph (c) of this section. This guideline covers absorbent materials, such as kitty litter or vermiculite, pigs, rags, towels, etc. Benzoic acid, 2-hydroxy-, compd. Official websites use .gov What is a Solvent? 29, 1990; 75 FR 13002, Mar. The generator can then use knowledge of the wastes to support subsequent annual determinations. Share sensitive information only on official, secure websites. PDF Solvents in the Workplace - U.S. Environmental Protection Agency These wastes may, however, continue to meet another hazardous waste listing description or may exhibit one or more of the hazardous waste characteristics. Methanimidamide, N,N-dimethyl-N-[2-methyl-4-[[(methylamino)carbonyl]oxy]phenyl]-, 6,9-Methano-2,4,3-benzodioxathiepin, 6,7,8,9,10,10-, 4,7-Methano-1H-indene, 1,4,5,6,7,8,8-heptachloro-. (1) Generators shall do one of the following: (i) Prepare and follow an equipment cleaning plan and clean equipment in accordance with this section; (ii) Prepare and follow an equipment replacement plan and replace equipment in accordance with this section; or. The retention period for the documentation is automatically extended during the course of any enforcement action or as requested by the Regional Administrator or the state regulatory authority. 40 CFR Part 261 -- Identification and Listing of Hazardous Waste Ethylenebisdithiocarbamic acid, salts & esters, Glucopyranose, 2-deoxy-2-(3-methyl-3-nitrosoureido)-, D-, D-Glucose, 2-deoxy-2-[[(methylnitrosoamino)-, Hydroperoxide, 1-methyl-1-phenylethyl- (R), 4,7-Methano-1H-indene, 1,2,4,5,6,7,8,8-octachloro-2,3,3a,4,7,7a-hexahydro-, 1,3,4-Metheno-2H-cyclobuta[cd]pentalen-2-one, 1,1a,3,3a,4,5,5,5a,5b,6-decachlorooctahydro-, 5,12-Naphthacenedione, 8-acetyl-10-[(3-amino-2,3,6-trideoxy)-alpha-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-, (8S-cis)-, Naphthalenamine, N,N-bis(2-chloroethyl)-, 2,7-Naphthalenedisulfonic acid, 3,3-[(3,3-, Phenol, 4,4-(1,2-diethyl-1,2-ethenediyl)bis-, (E)-, Phenol, 2,2-methylenebis[3,4,6-trichloro-. 7.2 Organic Solvents 7.2 Organic Solvents Most spent organic solvents will be classified as an F-Listed or Characteristic hazardous waste. The Electronic Code of Federal Regulations (eCFR) is a continuously updated online version of the CFR. This listing does not include K087 (decanter tank tar sludges from coking operations), Tar storage tank residues from the production of coke from coal or from the recovery of coke by-products produced from coal, Process residues from the recovery of light oil, including, but not limited to, those generated in stills, decanters, and wash oil recovery units from the recovery of coke by-products produced from coal, Wastewater sump residues from light oil refining, including, but not limited to, intercepting or contamination sump sludges from the recovery of coke by-products produced from coal, Residues from naphthalene collection and recovery operations from the recovery of coke by-products produced from coal, Tar storage tank residues from coal tar refining, Residues from coal tar distillation, including but not limited to, still bottoms, 1,2-Benzenediol, 4-[1-hydroxy-2-(methylamino)ethyl]-, (R)-. (b) The Administrator will indicate his basis for listing the classes or types of wastes listed in this subpart by employing one or more of the following Hazard Codes: Appendix VII identifies the constituent which caused the Administrator to list the waste as a Toxicity Characteristic Waste (E) or Toxic Waste (T) in 261.31 and 261.32. (3) Determination for generated quantities greater than 1,000 MT/yr for wastes that contain K181 constituents. Propanal, 2-methyl-2-(methyl-sulfonyl)-, O-[(methylamino)carbonyl] oxime. (iv) Collect and analyze samples in accordance with the waste sampling and analysis plan. L-Phenylalanine, 4-[bis(2-chloroethyl)amino]-, Phosphorodithioic acid, O,O-diethyl S-methyl ester, Propanoic acid, 2-(2,4,5-trichlorophenoxy)-, 1-Propanol, 2,3-dibromo-, phosphate (3:1), 2-Propenoic acid, 2-methyl-, methyl ester (I,T), 4(1H)-Pyrimidinone, 2,3-dihydro-6-methyl-2-thioxo-, Warfarin, & salts, when present at concentrations of 0.3% or less, Yohimban-16-carboxylic acid, 11,17-dimethoxy-18-[(3,4,5-trimethoxybenzoyl)oxy]-, methyl ester, (3beta,16beta,17alpha,18beta,20alpha)-, 2H-1,3,2-Oxazaphosphorin-2-amine, N,N-bis(2-chloroethyl)tetrahydro-, 2-oxide, Carbamothioic acid, bis(1-methylethyl)-, S-(2,3-di chloro-2-propenyl) ester, Hydroperoxide, 1-methyl-1-phenylethyl-(R), Carbamodithioic acid, 1,2-ethanediylbis-, salts & esters, Cyclohexane, 1,2,3,4,5,6-hexachloro-, (1alpha,2alpha,3beta,4alpha,5alpha,6beta)-, 2-Butenoic acid, 2-methyl-, 7-[[2,3-dihydroxy-2-(1-methoxyethyl)-3-methyl-1-oxobutoxy]methyl]-2,3,5,7a-tetrahydro-1H-pyrrolizin-1-yl ester, [1S-[1alpha(Z),7(2S*,3R*),7aalpha]]-, Yohimban-16-carboxylic acid, 11,17-dimethoxy-18-[(3,4,5-trimethoxybenzoyl)oxy]-, methyl ester,(3beta,16beta,17alpha,18beta,20alpha)-, D-Glucose, 2-deoxy-2-[[(methylnitrosoamino)-carbonyl]amino]-, 2,7-Naphthalenedisulfonic acid, 3,3-[(3,3-dimethyl[1,1-biphenyl]-4,4-diyl)bis(azo)bis[5-amino-4-hydroxy]-, tetrasodium salt, 2,4-(1H,3H)-Pyrimidinedione, 5-[bis(2-chloroethyl)amino]-, Carbamic acid, [1-[(butylamino)carbonyl]-1H-benzimidazol-2-yl]-, methyl ester, 1,3-Benzodioxol-4-ol, 2,2-dimethyl-, methyl carbamate, Carbamic acid, (3-chlorophenyl)-, 4-chloro-2-butynyl ester, Carbamic acid, 1H-benzimidazol-2-yl, methyl ester, Carbamic acid, phenyl-, 1-methylethyl ester, Carbamothioic acid, dipropyl-, S-(phenylmethyl) ester, Carbamothioic acid, bis(1-methylethyl)-, S-(2,3,3-trichloro-2-propenyl) ester, Ethanimidothioic acid, 2-(dimethylamino)-N-hydroxy-2-oxo-, methyl ester, Carbamic acid, [1,2-phenylenebis (iminocarbonothioyl)]bis-, dimethyl ester, Ethanimidothioic acid, N,N-[thiobis[(methylimino)carbonyloxy]]bis-, dimethyl ester, Phenol, 2-(1-methylethoxy)-, methylcarbamate.